Click install to proceed with installation. It will show a red warning message about unsigned drivers. Now, select the webcam device in the Device Manager and choose Update Driver and point to the driver folder. Your computer will now restart and you’ll be able to install unsigned drivers. Press F7 on your keyboard to select Disable driver signature enforcement.Ĥ. When your computer restarts you’ll see a list of options. Choose Troubleshoot > Advanced options > Startup Settings and click the Restart button.ģ. Press and hold the Shift key on your keyboard and click the Restart button.Ģ. To disable driver signature check in Windows 10:ġ. You may copy and replace this file into the original driver or use this package as is: Creative NX Pro 64-bit Win10 PD1130 401E driverīear in mind that due to this change, the signature of this driver no longer matches the original and Windows will not allow to install it unless the signature check is disabled. Here is the link to the driver after applying those changes. Those are from the original Creative driver. If you have 401E variant, there are few more changes required in the sensor configuration. If you have 403A model, change line 30- line 37 in the usbvm31b.inf to To setup the webcam, first download and unpack the official Vimicro driver: You can check your model in the Device Manager > Other Devices > Unknown Device > Properties > Details tab > select 'Hardware IDs' property. There are two camera modifications 401E and 403A. My model is PD1130, written on the back of the camera. However, this webcam can be setup with the driver for Vimicro webcam with some config modification. There is no official driver from Creative as this product is no longer supported. I'd like to share my experience on setting up Creative NX Pro webcam on Windows 10 64-bit.

Creative drivers windows 10